Eric the data that you need is these files

------------------------------------------------------------------------------

For repeated kinematic there are 3 repeated lines (2 files for each)

  • ground5a_int.dat
  • ground6a_int.dat
  • ground7a_int.dat
  • ground8a_int.dat
  • ground9a_int.dat
  • ground10a_int.dat

    • Files give, dist from start, lat , long, elev (ellipsoid wgs-72), tidal height ------------------------------------------------------------------------------

    For the repeated GPS line through Rutford Shear margin there are two files

  • shear1_int.dat
  • shear2_int.dat

    • Same format

    -----------------------------------------------------------------------------

    You could calculate the flexing profiles as defined in the JGR paper from the files given or use the values given in files

  • ground6_out.dat
  • ground8_out.dat
  • ground10_out.dat

    • ------------------------------------------------------------------------------

    If you want topographic data only then there is some more topographic data in fletch_gps.dat

    ------------------------------------------------------------------------------

    PIG res data is in res.dat

    ------------------------------------------------------------------------------

    Tidal data is in tides.dat

    Eric let me know if there any problems!